Vacuum tube lifter capacity 10kg -65kg for Handling sack box drum rubber luggage
1. Max.SWL 65KG
Low pressure warning.
Adjustable suction cup.
Remote control.
CE certification EN13155:2003.
China Explosion-proof Standard GB3836-2010.
Designed according to German UVV18 standard.
2. Easy to customize
Thanks to a large range of standardized grippers and accessories. such as swivels. angle joints and quick connections. the lifter is easily adapted to your exact needs.
3. Ergonomic handle
The lifting and lowering function is regulated with an ergonomically designed control handle. Controls on the operating handle make it easy to adjust the lifter’s stand-by height with or without a load.
4. Energy-saving and fail-safe
The lifter is designed to ensure minimum leakage. which means both safe handling and low energy consumption.
+ For ergonomic lifting up to 65 kg.
+ Rotate in horizontal 360 degrees.
+ Swing angle 270.
Serial No. | VCL120U | Max capacity | 40kg |
Overall Dimension | 1330*900*770mm | Vacuum equipment | Manually operate the control handle to suck and place the workpiece |
Control mode | Manually operate the control handle to suck and place the workpiece | Workpiece displacement range | Minimum ground clearance150mm,Highest ground clearance1500mm |
Power supply | 380VAC±15% | Power input | 50Hz ±1Hz |
Effective installation height on site | Greater than 4000mm | Operating ambient temperature | -15℃-70℃ |
Type | VEL100 | VEL120 | VEL140 | VEL160 | VEL180 | VEL200 | VEL230 | VEL250 | VEL300 |
Capacity (kg) | 30 | 50 | 60 | 70 | 90 | 120 | 140 | 200 | 300 |
Tube Length (mm) | 2500/4000 | ||||||||
Tube Diameter (mm) | 100 | 120 | 140 | 160 | 180 | 200 | 230 | 250 | 300 |
Lift Speed(m/s) | Appr 1m/s | ||||||||
Lift Height (mm) | 1800/2500 | 1700/2400 | 1500/2200 | ||||||
Pump | 3Kw/4Kw | 4Kw/5.5Kw |
Type | VCL50 | VCL80 | VCL100 | VCL120 | VCL140 |
Capacity (kg) | 12 | 20 | 35 | 50 | 65 |
Tube Diameter (mm) | 50 | 80 | 100 | 120 | 140 |
Stroke (mm) | 1550 | 1550 | 1550 | 1550 | 1550 |
Speed(m/s) | 0-1 | 0-1 | 0-1 | 0-1 | 0-1 |
Power KW | 0.9 | 1.5 | 1.5 | 2.2 | 2.2 |
Motor Speed r/min | 1420 | 1420 | 1420 | 1420 | 1420 |
Protection against power failure: ensure that the absorbed material will not fall under power failure.
Leakage protection: prevent personal injury caused by leakage, and the vacuum system is well insulated as a whole.
Protection of current overload: that is, to prevent damage to vacuum equipment due to abnormal current or overload.
Stress test, in-plant installation test and other tests to ensure that each set of equipment leaving the factory is safe and qualified.
Safe adsorption, no damage to the surface of material box.
For sacks, for cardboard boxes, for wooden sheets, for sheet metal, for drums, for electrical appliances, for cans, for baled waste, glass plate, baggage, for plastic sheets, for wood slabs, for coils, for doors, battery, for stone.